Thermo Scientific SHKE8000 Series, Руководство по обслуживанию

Страница: 18 / 106

The Accessory Test Tube Racks and Test Tube Rack Holders are available
in four sizes and are listed in Table 1-2. All the Test Tube Rack Holders are
adjustable in seven positions, swinging and locking at 15°, 30° and 45° in
either direction. Figure 1-17 illustrates the Test Tube Rack Holder with the
rack in place.
To remove the rack, spread the metal tabs on either end of the holder and
lift it out.
To install the Test Tube Rack Holder onto the shaker platform, remove the
rack and rotate the swing-bed of the holder 90° by pulling the knobs of
the locking pins on either end of the holder outward. The pins are locked
in the outward position by turning the knobs 1/4-turn (Figure 1-18).
Model SHKE8000 Series Shakers 1-9 Thermo Scientific
Section 1
Installation
Install the Test Tube
Holders
. ...
.........
. ...
.........
.
...
.........
. ...
.........
. ..
...
.....
..
.
..
...
.....
..
...
.........
...
.........
...
.........
...
.........
...
.........
...
.........
...
....
..... .........
...
...
....
..... .........
...
...
....
..... .........
...
Spread metal tabs outward
to remove test tube rack
Locking Pin to swing/tilt
test tube rack 15°, 30°, 45°
Figure 1-17. Test Tube Rack with Swing/Tilt Mechanism
Figure 1-18. Test Tube Rack Holder with Rack Removed and Bed Rotated 90°