Thermo Scientific LevelPRO Series, Инструкция по применению

Страница: 96 / 99

Index
I
I/O. See inputs, outputs.
inputs
contact closure, 1-3
overview, 1-3
specification, B-2
IOUT_HOLD_VALUE, C-7
IOUT_MAX_CORRECTION, C-7
IOUT_MIN_CORRECTION, C-7
IOUT1_VALUE, C-7
J
jumper settings
for fieldbus board, 2-2
L
Level Setup menu, 4-2–4-10 , 4-2–4-10
LEVEL_AT_MAX_IOUT, C-7
LEVEL_AT_MIN_IOUT, C-7
LEVEL_CAL_POINTX, C-7
LevelPro Setup menu, 3-10 , 4-1–4-10
link master, 1-2
loop test, 6-1–6-2
LPRO_CMD, C-7
LUMP_STATUS, C-7
M
MAN. See manual mode
manual mode, 3-9
MAX_IOUT_VALUE, C-7
menus, 3-10–3-11
Actions, 4-10
AI_Transducer, 3-10
Alarm Bad Flags Status, 6-6
Current Output Setup, 4-8–4-10
Diag/Service, 3-10 , 6-1–6-6
Gauge Calibration, 5-4–5-9
Level Setup, 4-2–4-10 , 4-2–4-10
LevelPro Setup, 3-10 , 4-1–4-10
Loop Test, 6-1–6-2
Standardization, 5-1–5-4
Time Constant Setup, 4-5–4-8
Trim Analog Output, 6-3–6-6 , 6-4
methods. See menus.
MIN_IOUT_VALUE, C-7
N
NI-FBUS Configurator, 3-1–3-16
node address, 3-4
NUMBER_OF_RELAYS, C-7
O
OOS. See out of service mode
ordering information, A-1–A-2
out of service mode, 3-9
outputs, A-2
4-20 mA current, 1-3 , B-2
contact closure, B-2
overview, 1-3
P
parameters
alarm, C-1
alarm and status flags, C-1
bad flags, C-1
calibration, C-1
command, C-1
configuration, C-1
specific to LevelPRO, C-1–C-8
status, C-1
PD tag, 3-4
power, A-1
primary time constant, 4-6
R
relay option, A-2
RELAY1_ALM_MODE, C-8
RELAY1_LATCH_MODE, C-8
RELAY2_ALM_MODE, C-8
RELAY2_LATCH_MODE, C-8
resource block, 1-2 , 3-3
Root Menu, 3-10
INDEX-2 LevelPRO with F
OUNDATION
™ fieldbus Application Guide Thermo Fisher Scientific