Thermo Scientific LevelPRO Series, Инструкция по применению

Страница: 30 / 99

The NI-FBUS Configurator
Configurator Basics
Directly Editing
Parameters
ectly Editing
Parameters
Caution The preferred configuration method is to use menus as described
in the previous section; however, you can edit a parameter directly if your
host does not support menus. Take care when modifying parameters
directly. If you change the value for one parameter, you may need to
change the value for other parameters.
▲
To edit a parameter, click on it. In some cases, you set the parameter value
by selecting from a drop-down box. For other parameters, you enter the
value. When you change a parameter, an asterisk appears by the name.
Figure 3–10. Examples of editing a parameter using the NI-FBUS Configurator
There are two ways to save your changes, depending on what you want to
do:
●
If you want the changes to take effect immediately, click the
Write/Save button in the configuration window toolbar. You can
also click the Write Changes button on the bottom of the block
configuration window.
●
Make other changes and save them all at once by clicking the
Write/Save All button in the configuration window toolbar. If you
do not click the Write/Save All button, you can make all the
changes take effect when you download the project by checking the
Write Contained Block Parameters box. Download the
configuration is explained further in “Saving & Downloading the
Configuration” .
3-12 LevelPRO with F
OUNDATION
™ fieldbus Application Guide Thermo Fisher Scientific