Thermo Scientific CryoStar NX70 series Скачать руководство пользователя страница 104

Страница: 104 / 116

Thermo Scientific CryoStar NX70 Operator Guide

104

Emptying the Defrosting and Cold D Liquids

The liquids from the daily defrosting cycle as well as the liquid of a Cold D cycle is collected in a bottle,
located in the base of the cryostat.

The liquids from the daily defrost and Cold D cycle might be hazardous! Wear protective
clothing - see Recommended Disinfection Procedure.

Note

The capacity of the bottle is 2.5 Litres (approximately 0.66 Gallons).

It is recommended to empty and disinfect the bottle once a week during the routine cleaning procedure.

To empty the Defrosting Liquid Bottle:

•

Open the front door and pull out the bottle from the rack.

•

Dispose of the liquid in accordance to the laboratory regulations and clean it.

Note

After cleaning the bottle, it is recommended that a small volume of Sanosil® is added.

•

Wipe out any liquids from the rack.

•

Put the bottle back into the rack and close the door.

Содержание CryoStar NX70 series





















































































































Результаты поиска

Содержание CryoStar NX70 series

Отзывы:

Похожие инструкции для CryoStar NX70 series

Бренды по названию

Популярные бренды

Thermo Scientific CryoStar NX70 series, Руководство оператора

Результаты поиска

Содержание CryoStar NX70 series

Отзывы:

Похожие инструкции для CryoStar NX70 series

Бренды по названию

Популярные бренды