Thermo orion 410Aplus, Инструкция по эксплуатации

Страница: 67 / 129

Benchtop pH/ISE Meter Instruction Manual
Use with Accessories 66
E. Use with Strip Chart Recorders
The Models 520Aplus, 525Aplus, 720Aplus, and 920Aplus can be used
with a strip chart recorder. The audio jack on the rear panel provides an
output for a strip chart recorder of absolute millivolts independent of
operating mode. On the 525Aplus, 720Aplus and 920Aplus this output is
for channel one only.
The voltage provided is a direct uncompensated readout of the electrode
response, set at a one to one ratio.
To interface your recorder to the meter, a 2.5 mm phone plug is required.
The tip (inner) connection should be wired to the high side of the recorder
and the sleeve (outer) connection should be wired to the low side of the
recorder. A Switchcraft type 850 or equivalent phone plug is suggested.
F. Use with DataCOLLECT™
DataCOLLECT can be used with Models 520Aplus, 525Aplus, 720Aplus,
and 920Aplus.
DataCOLLECT is a program that can be easily installed for your
unattended PC to collect data from Thermo Orion’s family ISE, pH,
Conductivity and Dissolved Oxygen (DO) meters from up to 4 serial ports
simultaneously.
This software operates in Windows
®
3.1
†
, Windows 95 an Windows NT
version 4 Platforms.
DataCOLLECT collects the data generated by the meter, which is passed to
the PC via RS232 output. The required computer interface cable, Cat.No.
0ACBLO, is included with the DataCOLLECT software package.
DataCOLLECT also allows you to export the data received into programs
such as Excel
† , Lotus †† , and Access † for your convenience.
(
†
Registered Trademark of Microsoft Corporation)
(
††
Registered Trademark of Lotus Development Corporation)