manualshive.com logo in svg

Thermo orion 410Aplus, Инструкция по эксплуатации

Поделиться
Скачать
Thermo orion 410Aplus Скачать руководство пользователя страница 55

G.  Models 520Aplus, 525Aplus, 720Aplus Dissolved 

Oxygen Measurements 

Dissolved Oxygen measurements are displayed in ppm when the Thermo
Orion 9708  Dissolved Oxygen Electrode (Cat. No. 970899) is used with
the Thermo Orion Models 520Aplus, 525Aplus and 720Aplus and
920Aplus Meters. Perform the following steps to prepare the meter and
calibrate the electrode.

1. Connect the D.O. electrode Model 9708 to meter. Leave electrode 

mode switch “OFF”. 

2. For the Models 525Aplus and 720Aplus select the correct channel by 

pressing 2nd then channel.

3. Disconnect ATC probe.

NOTE:   ATC probe must not be connected to the meter 
and the meter should be calibrated to pH 7 at 25.0˚C.

4. Press mode until pH mode indicator is displayed.

5. Press hold. Turn the hold feature off.

6. Press measure. Press set temp. Enter 25.0 at the prompt and 

press yes.

7. Press calibrate. Enter 1 at the ENTER NO. OF BUFFER prompt 

and press yes.

8. Enter 7.00 to the CAL AS  prompt and press yes.

9. At the slope prompt enter 100.0 and press yes. The meter 

automatically returns to measure mode.

10. Turn the mode switch on the electrode to BT CK. Good battery 

operation is indicated by a reading of 13.40 or greater on the meter.

11. Turn the mode switch on the electrode to ZERO. Use the zero 

calibration control on the electrode to set the meter to read 0.00.

Benchtop pH/ISE Meter Instruction Manual

Other Measurement Modes

54

Содержание 410Aplus


































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды