manualshive.com logo in svg

Thermo orion 410Aplus, Инструкция по эксплуатации

Поделиться
Скачать
Thermo orion 410Aplus Скачать руководство пользователя страница 26

Benchtop pH/ISE Meter Instruction Manual

Calibration and Measurement of pH

25

F.  Model 710Aplus pH Calibration and Measurement 

Autocalibration

Autocalibration is the feature of the Model 710Aplus Meter that
automatically recognizes five buffers, 1.68, 4.01, 7.00, 10.01, and 12.46,
within a range  of ± 0.5 pH units. Results greater than ± 0.5 pH units from
the correct value will trigger an operator assistance code. During
calibration, the user waits for a stable pH reading.  Once the electrode is
stable, the meter automatically recognizes and displays the temperature
corrected value for that buffer. Pressing yes enters the value in memory.

NOTE: Do not scroll when using autocalibration. If you 
want to exit this menu at any time, press measure.

Manual Calibration

To calibrate with buffers other than 1.68, 4.01, 7.00, 10.01, or 12.46, use
the manual calibration technique. The calibration sequence is the same as
autocalibration except buffer values are scrolled in and then entered.

NOTE: For manual calibration, you must use the scroll 

or    keys. Even if the value displayed is the correct 

value for your buffer you must press a scroll key to 
start the editing process.  Press yes to accept each 
digit. Otherwise, the meter assumes autocalibration is 
being performed.

Multipoint pH Calibration

Up to a five (5) point  calibration can be performed on the Model 710Aplus
Meter. Both autocalibration and manual calibration may be used within the
same calibration curve. For example, autocalibration may be used with the
1.68, 7.00, and 10.01 buffers while manual calibration may be used with
3.78 and 9.18 buffers.

▼

▼

Содержание 410Aplus


































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды