manualshive.com logo in svg

Thermo orion 410Aplus, Инструкция по эксплуатации

Поделиться
Скачать
Thermo orion 410Aplus Скачать руководство пользователя страница 111

Benchtop pH/ISE Meter Instruction Manual

Overview of Meter Functions 520Aplus,525Aplus,720Aplus and 920Aplus

110

Alarm

The Models 520Aplus, 525Aplus, 720Aplus, and 920Aplus have an alarm
function. Separate alarms can be set for each mode and for channels 1 and 2
(on the 525Aplus, 720Aplus and 920Aplus). The alarm limits can be set at
the limits of each measuring range, -2.000 to +19.999 pH,  -1600.0 to
+1600.0 mV, -1999.9 to +1999.9 relative mV, and 0.0 to 19900 for
concentration (720Aplus and 920Aplus only).Press 2nd then alarm to
access the set alarm function, then follow the prompts.

Prompt

Keypress/Action

Press 2nd then alarm.

1. 1-PH LIMIT HI

The current high alarm limit for 

MEASUREMENT

the mode and channel is displayed.
Change as desired then press yes.

2. 1-PH LIMIT LO

The current low alarm limit for the   

MEASUREMENT

mode is displayed. Change as 
desired, then press yes. Meter then 
returns to MEASURE mode.

Repeat sequence for each channel. Select the other channel by pressing
2nd, then channel, then set alarms.

NOTE:  The prompts above are for the
Model 920Aplus.

Key 0 Standby

Press standby (0) to place meter into standby mode. When in standby
mode, the display of the meter  is illuminated at half intensity. This feature
prolongs display life. The prompt is STANDBY: ANY KEY. Press any key
to restart meter operation. See Autoshutoff section to take advantage of
another meter saving feature.

Содержание 410Aplus


































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды