Thermo King SGCO 3000, Руководство пользователя

Страница: 143 / 144

143
To Next Page
Submenus
Current RPM
Speed Solenoid
Tank Size
Fuel Sensor
Throttle Solenoid
Date/Time
ID No.
Ser. No.
Submenus
PTI (Pretrip Inspection Test)
Manual Function Test
System Setup
COMMANDS
MENU
Oil Level Switch
Coolant Temperature Sensor
RPM Sensor
Preheat Relay
Fuel Hold Relay
Fuel Pull Relay
Start Relay
Oil Pressure Switch
RPM Sensor
Output Voltage
Display Test
Preheat Relay Test
Fuel Hold Relay Test
Fuel Pull Relay Test
Start Relay Test
• When PTI is complete,
display shows test result:
“PASSED” or “FAILED”.
• If “FAILED”, correct any
problems and repeat PTI.
• Press key to start test.
When test complete, display
shows test result: “PASSED” or
“FAILED”.
• If “FAILED”, correct problem
and repeat test.
MAIN MENU
ALARM LIST MENU
DATA MENU
To/From
Next Page
CONTROLLER MENU GUIDE
PAUSE MODE DISPLAYS deLAY / AC
1
RESTART IN XX MIN.
2
STANDARD DISPLAY
•
Top line shows Alarm Code, and the position of the alarm
and number of alarms stored in memory (e.g. “1/2”).
• Middle lines show alarm text.
• Bottom line shows alarm status.
• View and write down all alarms before acknowledging.
• Press key to view additional alarms.
• Press key to acknowledge the alarm being displayed.
• Correct all problems before returning the unit to service.
Submenus
Analog Inputs
Digital Inputs
Digital Outputs
Internal States
DATA MENU
Voltage Meas.
Field Current
Water Temp.
Running Freq.
Bat. Voltage
Air Filter Switch
Coolant Level Low
Oil Pressure Low
Oil Level Low
Spare 1
Spare 2
Starter FB
Air Heater FB
Fuel Pull FB
Fuel Hold FB
Speed Solenoid FB
Spare 2 FB
Bat. Charger
Start Relay
Preheat Relay
Fuel Relay Pull
Fuel Relay Hold
State
RPM
ALARM LIST MENU
MESSAGE LIST MENU
MESSAGE LIST MENU
•
Top line shows Message Code, and the position of the message
and number of messages stored in memory (e.g. “1/2”).
• Middle lines show message text.
• Bottom line shows message status.
• View and write down all messages before acknowledging.
• Press key to view additional messages.
• Press key to acknowledge the message being displayed.
• Correct all problems before returning the unit to service.
COMMANDS MENU
Speed Solenoid: On
• Press or key to toggle between Speed
Solenoid On and Off (High Speed and Low
Speed).
• Press key to return to System Setup
Submenu.
Tank Size: XX
• Press or key to scroll value.
• Press and keys at same time to save new
setting and return to System Setup Submenu.
• Press key to return to System Setup Submenu
without saving new setting.
Fuel Sensor: No
• Press or key to toggle between Fuel
Sensor Yes and No.
• Press key to return to System Setup
Submenu.
Throttle Solenoid: No
• Press or key to toggle between Throttle
Solenoid Yes and No.
• Press key to return to System Setup
Submenu.
Keypad Operating Tips
Text Input:
• To enter a number: Press the
U
P
or D
OWN
key to increase or
decrease the value of a digit in the display.
• Press the E
NTER
key to scroll the cursor to the right.
To Enter a Controller Menu or Submenu:
• Press
A
LARM
key to directly enter the Alarm List Menu.
•
Press the
E
NTER
key or the
E
SCAPE
key
to enter the Main
Menu.
• Press E
NTER
key to enter a menu from the Main Menu, or a
submenu from its parent menu.
• Press E
SCAPE
key to return to the Main Menu from a menu, or
a menu from a submenu.
To Scroll in a menu:
• Press
U
P
key to scroll up.
• Press D
OWN
key to scroll down.
To Enter a Command or execute a task:
• Press
E
NTER
key.
To Enter a New Value in a Screen:
• Press
E
NTER
key and E
SCAPE
key at the same time.
To change language
• Press
L
ANGUAGE
key.
Footnotes:
1
When Delayed Cold Start is set to ON, controller shows “dELAy
/ AC” screen and alternator output remains off until engine
temperature increases to 32 C (90 F).
2
“RESTART IN XX MIN.” screen indicates controller has
stopped unit operation due to an alarm. Controller will attempt to
restart unit in the time shown.