12
Value range
Adjustable values from SendoPro
I, II, III, all
Adjustable values from theSenda B
I, II, III
Adjustable values from the theSenda Plug app
I–VIII, all
Adjustable values from theSenda S
I, II
With the theSenda S, the group address can be assigned as
follows:
For IR group address C1:
Press the and
buttons at the same time for
at least 5 s
I
Press the and
buttons at the same time for
at least 5 s
II
For IR group address C2:
Press the and
2
buttons at the same time for
at least 5 s
I
Press the and
2
buttons at the same time for
at least 5 s
II
With the theSenda B, the group address can be assigned
without the app as follows:
For IR group address C1:
Press the and
buttons at the same time for
at least 5 s
I
Press button A and the
button at the same time
for at least 5 s
II
Press the and
buttons at the same time for
at least 5 s
III
For IR group address C2:
Press the and
2
buttons at the same time for
at least 5 s
I
Press button A and the
2
button at the same time
for at least 5 s
II
Press the and
2
buttons at the same time for
at least 5 s
III
Scene 1 C1, C2/scene 2 C1, C2
The required dimming value for each lighting group can be
assigned to scene 1 and scene 2.
Value range (with SendoPro/theSenda B/app)
Adjustable values
0–100%
With the theSenda S or the theSenda B, the lighting is set to a
required brightness and saved as follows:
Press the button for at least 3 s.
Scene 1 has been
saved
Press the button for at least 3 s.
Scene 2 has been
saved
The scene can be opened by briefly pressing the button.
Control commands via remote control
The following control commands can be triggered with the
remote control:
Control command
Description
Can be
triggered
by Sen-
doPro/
theSenda
B app
Can be
triggered
by the-
Senda P/
theSenda
B app
DALI configuration
Configuration of the lighting
group operating mode/DALI
components
Group assignment
(unaddress.)
Configuration of the
unaddressed lighting groups
x
Group assignment
(all)
Configuration of all lighting
groups
x
Change group
assignment
Change configuration of the
lighting groups
x
End group
assignment
End configuration of the
lighting groups
x
Change over to
broadcast opera-
ting mode
Changeover from "addres-
sable" to "broadcast". After
the changeover, <thePassa
P360-111 DALI> must be
selected as the type.
x
Reset DALI EBs
All connected DALI EBs are
reset to the factory settings
x
Reset DALI relay
The connected DALI relay is
reset to the factory setting.
x
Switching light C1
Lighting group C1 can be
switched on and off.
x
x
Switching light C2
Lighting group C2 can be
switched on and off.
x
x
Switching light (all) All lighting groups can be
switched on and off together
x
x
Teach-in C1
Execute for lighting channel
C1
x
x
Teach-in C2
Execute for lighting channel
C2
x
x
Teach-in C1 + C2
Activate for all lighting chan-
nels C1, C2
x
Presence test
ON/OFF
x
x
Light test
ON/OFF
x
Restart
Restart the detector
x
x
Factory settings
Set all parameters and
settings to the factory set-
ting; the DALI configuration
remains unchanged.
x
Teach-in C1, C2
During the teach-in process, the currently measured bright-
ness value is adopted as brightness setpoint value. Values
outside the permitted range are set to the appropriate limit
value.
The teach-in control command can be executed with the
SendoPro, theSenda B/app or theSenda P.
With the theSenda P, the teach-in process is saved as follows:
Teach-in channel C1
Press the
button and then the
button
within 10 s
Teach-in channel C2
Press the
2
button and then the
button
within 10 s
Teach-in channel C1
+ C2
Press the
button
Factory settings
After resetting, the presence detector is preset via the <Fac-
tory settings> parameter with the following parameter values:
thePassa P360-221 DALI
Содержание thePassa P360-221 DALI UP WH
Страница 17: ...17 ...
