75
GB
If setting values for brightness <= 2.5 AND switch-off delay time light <= 2 min:
faster response to changes in actual brightness when in operating mode switching
of one lighting row.
7. Test-Mode
The PresenceLight has two test modes.
●
Test presence, page 75
●
Test lighting, page 77
The test mode can only be started with voltage.
7.1 Test presence
The test presence serves to test presence detection and parallel switching.
Activate
-
"Test presence on" with the management remote control SendoPro 868-A
-
via bus object (33)
The test mode presence can always be activated.
Terminate
With subsequent restart:
-
Command "Test presence off" with the management remote control
SendoPro 868-A
-
Loss of bus voltage
-
Automatically according to the time set with the ETS
Without restart:
-
Activation of test lighting with the management remote control SendoPro 868-A
LED display
channel status
Description
On
With movement (LED on) close channels A lighting and H presence.
