81
GB
9.1 LED display
LED
Description
Blinking in 1 second
tact
The presence detector is in the start-up phase. See page 72.
Flickering during
3 sec
The command sent from the management remote via infrared is rejected by
the presence detector.
Is the request consistent with the setting in the presence detector, the
detector confirms.
Lights up shortly
The command sent from the management remote via infrared is rejected by
the presence detector. The command is not valid. Check the detector type
selected in the SendoPro 868-A.
Is the request not consistent with the setting in the presence detector, the
detector responds accordingly.
Fast blinking
Error blinking; The presence detector has found an error. See page 80
Blinking, 3 sec On
0.3 sec Off
The presence detector is in test lighting. See page 77
Lights or flickers
irregularly
The presence detector is in test presence see page 75. The LED displays detec-
tion of movement.
