74
6.2 Brightness level channel A light
Brightness level define the minimum brightness required. Current prevalent bright
-
ness is measured below the presence detector. If the prevalent brightness is below
the setpoint value, the light will switch on as long as presence is detected (with
function mode fully-automatic).
Value range
The actual brightness level can be increase or decrease in 5 %-steps. The
actual brightness level setting can be read-out via KNX communication object.
Lux value
The current measured brightness level can be adopted by the SendoPro command
Teach-in.
5 %-steps
5–2000 Lux
If setting values for brightness <= 2.5 AND switch-off delay time light <= 2 min:
faster response to changes in actual brightness when in operating mode switching
of one lighting row.
6.3 Alternativ brightness level channel A light
The alternative brightness level value can be used to set a second different
brightness set point value. For example, a day and night mode with two different
brightness levels can be set up in combination with the brightness set point value
channel A light. The alternative brightness set point value is activated or changed
via a bus object.
Value range
The actual brightness level can be increase or decrease in 5 %-steps. The actual
brightness level setting can be read-out via KNX communication object. Lux value
The current measured brightness level can be adopted by the SendoPro command
Teach-in.
5 %-steps
5–2000 Lux
