65
GB
2.1 Control type
Switching
The lighting switches on in case of presence and insufficient brightness, and off in
case of absence or sufficient brightness.
Constant Light Control
In Constant Light Control mode, the brightness is constantly maintained at th pre-
set value. It can be started fully automatically or manually using the push button
or remote control. Manually switching off, dimming or changing the settings stops
control mode for the duration of the presence.
2.2 Installation and service support
Helpful functions are available for start up and subsequent maintenance support.
●
Changing parameters using the management remote control SendoPro 868-A
The presence detector can send configuration and diagnostic information to the
management remote control SendoPro 868-A via radio transmission (868MHz).
