76
LED display
channel status
Description
Off
With absence (LED off) open both channels after 15 sec.
Test response
-
Deactivate brightness measurement, light output does not react to brightness
-
Detector does not respond as in fully-automatic function mode, also if semi-
automatic is set.
-
The control type changes to switching if the control type is set to constant
light control. The light is not controlled.
-
Light «On» with movement; light «Off» with absence or no movement
-
Channel A lighting and H presence have a fixed switch-off delay time of 15 sec.
-
Room monitoring responds normally as in normal mode.
-
Switch-on delay time channel H and J presence is set fixed to 0 sec.
Commands and adjustable parameters
During test mode the following commands are possible with the management
remote control SendoPro 868-A:
-
Terminate test presence
-
Activate test lighting
The presence detector resets after test mode has terminated.
