77
GB
7.2 Test lighting
The test mode test light serves to monitor the brightness set point value (bright-
ness threshold).
Activate
-
Test lighting «On» with the management remote control SendoPro 868-A
-
via bus object (34)
The test lighting can always be activated.
Terminate
With subsequent restart:
-
Test lighting «Off» with the management remote control SendoPro 868-A
-
Loss of bus voltage
-
Automatically according to the time set with the ETS
Without restart:
-
Activation of test presence with management remote control SendoPro 868-A
LED display
Description
Blinking, 3 sec On
0.3 sec Off
The LED blinks, as long as the test lighting is active.
Test response
The presence detector behaves 100% as in normal operation, only the reaction
to light/dark is faster. Thus the brightness threshold and the adaptive response
is tested.
All selected functions and parameters remain unchanged.
Commands and adjustable parameters
During test mode the following commands are possible with the management
