Thales SafeNet Luna Network HSM 7.3 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 59

background image

Chapter 5: Backing Up the Appliance Configuration

[Net_HSM] lunash:>sysconf config restore -service users -file Net_HSM_Config_20120222_

0556.tar.gz

WARNING !!

This command restores the configuration backup file: Net_HSM_Config_20120222_

0556.tar.gz.
It first creates a backup of the current configuration before restoring: Net_HSM_Config_

20120222_0556.tar.gz.

If you are sure that you wish to proceed, then type 'proceed', otherwise type 'quit'.
> proceed

Proceeding...
Created configuration backup file: Net_HSM_Config_20120222_0606.tar.gz
Restore the users configuration: Succeeded
You must reboot the appliance for the changes to take effect.
Please check the new configurations BEFORE rebooting or restarting the services.

You can restore the previous configurations if the new settings are not acceptable.

Command Result : 0 (Success)

[Net_HSM] lunash:>sysconf appliance reboot
WARNING !!

This command will reboot the appliance.

All clients will be disconnected.

If you are sure that you wish to proceed, then type 'proceed', otherwise type 'quit'
> proceed

Proceeding...
'hsm supportInfo' successful.
Use 'scp' from a client machine to get file named:

supportInfo.txt
Broadcast message from root (pts/1) (Wed Feb 22 08:00:41 2012):
The system is going down for reboot NOW!

Reboot commencing

Command Result : 0 (Success)

7.

After rebooting again, we are able to log in with our original "admin" password.

Once again we check the list of users.

[Net_HSM] lunash:>user list

Users

Roles

Status

RADIUS

admin

admin

enabled

no

bob

monitor

enabled

no

john

admin

enabled

no

monitor

monitor

enabled

no

operator

operator

enabled

no

We see that users "bob" and "john" have returned. We could also log in as "operator" and "monitor" and find
that their chosen passwords have been restored.

8.

Finally, ask for the list of system configuration backup files one more time.

[Net_HSM] lunash:>sysconf config list

Configuration backup files in file system:

Size

| File Name

| Description

---------------------------------------------------------------------------------------------
16641

| Net_HSM_Config_20120222_0556.tar.gz

| testing-this

SafeNet Luna Network HSM 7.3 Appliance Administration Guide

007-013576-005 Rev. A 13 December 2019 Copyright 2001-2019 Thales

58

«
...
56
57
58
59
»

Содержание SafeNet Luna Network HSM 7.3




























































Отзывы:

Нет отзывов

Похожие инструкции для SafeNet Luna Network HSM 7.3

Бренд: Varian Страницы: 41

Interlogix TX-E231

Бренд: United Technologies Страницы: 2

EasyLook PPDF17000

Бренд: Abus Страницы: 23

JBL CINEMA SB130

Бренд: Harman Страницы: 16

Бренд: Response Alarms Страницы: 16

Бренд: ESAB Страницы: 20

Medialon MAS Pro Dante D

Бренд: 7th Sense Страницы: 2

Бренд: Idis Страницы: 51

TagShot III-27'

Бренд: Rugged CCTV Страницы: 11

Бренд: EAW Страницы: 1

Бренд: Titan Страницы: 3

Бренд: Q-See Страницы: 2

Бренд: Abus Страницы: 99

Бренд: Idis Страницы: 43

Бренд: LAHTI PRO Страницы: 20

Бренд: VADDIO Страницы: 6

Magnum Alert 800

Бренд: NAPCO Страницы: 16

Бренд: MAKS Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды