Chapter 2: Client Connections
CAUTION!
Never insert TAB characters into the crystoki.ini (Windows) or crystoki.conf
(UNIX) file.
Network Receive Timeout
One timeout value that might require change is the ReceiveTimeout value in the "LunaSA Client" section of the
configuration file. This timeout value is the period that the SafeNet Luna Network HSM client will wait for a
response from the SafeNet Luna Network HSM before determining that the appliance is off-line. The default
value of 20 seconds provides a worst-case scenario over a larger WAN, but may be inappropriate for some
SafeNet Luna Network HSM deployments (such as SafeNet Luna HSMs in an HA configuration) where a
quicker determination of the health of the SafeNet Luna Network HSM system is required. This value can be
set in the SafeNet Luna Network HSM configuration file as follows:
Windows (crystoki.ini)
[LunaSA Client]
:
ReceiveTimeout=<value in milliseconds> //default is 20000 milliseconds
:
UNIX (etc/Chrystoki.conf)
LunaSA Client = {
:
ReceiveTimeout=<value in milliseconds>;
:
}
SafeNet Luna Network HSM 7.3 Appliance Administration Guide
007-013576-005 Rev. A 13 December 2019 Copyright 2001-2019 Thales
40
