Thales SafeNet Luna Network HSM 7.3, Руководство администратора

Страница: 46 / 59

CHAPTER 4:
System Logging
SafeNet Luna Network HSM gathers logs about appliance events, separate from events on the HSM itself. This
chapter contains the following sections about system logging:
> "About System Logging" below
> "Configuring System Logging" on the next page
• "Rotating System Logs" on the next page
• "Customizing Severity Levels" on page 48
• "Reading System Logs" on page 49
• "Exporting System Logs" on page 50
• "Deleting System Logs" on page 51
> "Remote System Logging" on page 51
• "Configuring a Remote Syslog Server" on page 52
• "Customizing Remote Logging Severity Levels" on page 53
For HSM event logging, see
"Audit Logging Overview" on page 1
.
About System Logging
Logs are managed with the
syslog
commands (see
"syslog" on page 1
), where you set rotation and other
parameters to suit your own monitoring and management schedule. You can configure flexible logs to gather
only information you consider relevant, or send different logs to different remote hosts.
NOTE Syslog format is in accordance with RFC 5424. See "Syslog Introduction" on page 1
for information on reading and interpreting system log messages.
Log Severity Levels
Event logs are categorized according to the severity of their impact on the system. The table
"syslog Severity
Levels" below
defines the different categories from most to least severe. You can customize logging to include
events based on their severity.
Severity Keyword Severity Description
emerg/panic System is unusable
alert Action must be taken immediately
Table 1: syslog Severity Levels
SafeNet Luna Network HSM 7.3 Appliance Administration Guide
007-013576-005 Rev. A 13 December 2019 Copyright 2001-2019 Thales
46