Thales SafeNet Luna Network HSM 7.3 Скачать руководство пользователя страница 56

Страница: 56 / 59

Chapter 5: Backing Up the Appliance Configuration

NOTE

Check the new configurations before rebooting or restarting the services.

Example of Backing Up and Restoring Your Appliance Configuration

If we factory reset the configuration parameters, a snapshot backup is created automatically, but for this
example we will explicitly create a configuration backup file.

Create a backup of current appliance configuration parameters.

[Net_HSM] lunash:>sysconf config backup -description Example backup

Created configuration backup file: Net_HSM_Config_20120222_0556.tar.gz

Command Result : 0 (Success)

Check the current state of a configuration parameter (users).

[Net_HSM] lunash:>user list
Users

Roles

Status

RADIUS

admin

enabled

bob

monitor

enabled

john

admin

enabled

monitor

enabled

operator

enabled

Command Result : 0 (Success)

Perform the factory reset of the chosen configuration parameter (users).

[Net_HSM] lunash:>sysconf config factoryReset -service users

WARNING !! This command resets the configuration of the selected service(s) to factory

defaults.

Resetting services to factory defaults can affect connectivity and the operation of the HSM.

If you are sure that you wish to proceed, then type 'proceed', otherwise type 'quit'.

> proceed

Proceeding...

Resetting service(s) to factory defaults:

-----------------------------------------

users : succeeded

Command Result : 0 (Success)

[Net_HSM] lunash:>sysconf appliance reboot

WARNING !!

This command will reboot the appliance.

All clients will be disconnected.

If you are sure that you wish to proceed, then type 'proceed', otherwise type 'quit'
> proceed

Proceeding...
'hsm supportInfo' successful.
Use 'scp' from a client machine to get file named:

supportInfo.txt
Broadcast message from root (pts/1) (Wed Feb 22 08:00:41 2012):
The system is going down for reboot NOW!

Reboot commencing

Command Result : 0 (Success)

SafeNet Luna Network HSM 7.3 Appliance Administration Guide

Содержание SafeNet Luna Network HSM 7.3




























































Результаты поиска

Содержание SafeNet Luna Network HSM 7.3

Отзывы:

Похожие инструкции для SafeNet Luna Network HSM 7.3

Бренды по названию

Популярные бренды

Thales SafeNet Luna Network HSM 7.3, Руководство администратора

Результаты поиска

Содержание SafeNet Luna Network HSM 7.3

Отзывы:

Похожие инструкции для SafeNet Luna Network HSM 7.3

Бренды по названию

Популярные бренды