Chapter 5: Backing Up the Appliance Configuration
4.
After the appliance returns from reboot, restart the SSH session and log in.
[Net_HSM] lunash:>
login as: admin
[email protected]'s password:
Last login: Wed Feb 22 05:44:39 2012 from 192.20.10.143
SafeNet Luna Network HSM 7.0 Command Line Shell - Copyright (c) 2001-2017 Gemalto, Inc. All
rights reserved.
*****************************************************
**
**
**
For security purposes, you must change your **
**
admin password.
**
**
**
**
Please ensure you store your new admin
**
**
password in a secure location.
**
**
**
**
DO NOT LOSE IT!
**
**
**
*****************************************************
Changing password for user admin.
You can now choose the new password.
A valid password should be a mix of upper and lower case letters,
digits, and other characters.
You can use an 8 character long
password with characters from at least 3 of these 4 classes.
An upper case letter that begins the password and a digit that
ends it do not count towards the number of character classes used.
Enter new password:
Re-type new password:
passwd: all authentication tokens updated successfully.
Password change successful.
The reset to factory appliance settings for the
users
parameter seems to have worked. Our "admin"
password was reset to the default password "PASSWORD", and we had to apply a non-default password.
5.
With that done, we can verify if additional aspects of the
users
parameters were also reset to factory spec.
[Net_HSM] lunash:>user list
Users
Roles
Status
RADIUS
admin
admin
enabled
no
monitor
monitor
enabled
no
operator
operator
enabled
no
Command Result : 0 (Success)
Notice that created users "bob" and "john" are gone, but the system-standard users "admin", "operator",
and "monitor" persist. Both "operator" and "monitor" will have had their passwords reset to the default, as
well.
[Net_HSM] lunash:>sysconf config list
Configuration backup files in file system:
Size
|
File Name
|
Description
--------------------------------------------------------------------------------------------
16641
| Net_HSM_Config_20120222_0556.tar.gz | testing-this
16588
| Net_HSM_Config_20120222_0558.tar.gz | Automatic Backup Before Restoring
Command Result : 0 (Success)
6.
The list of configuration backup files is unchanged. We can choose one and restore it.
SafeNet Luna Network HSM 7.3 Appliance Administration Guide
007-013576-005 Rev. A 13 December 2019 Copyright 2001-2019 Thales
57
