background image

FF711BG

7-8

Tetra Pak

Hoyer

3

5

2

4

6

1

7.3.4 Vane pump

If the pump is noisy or gets blocked during operation,
unscrew the screw (Part.1, Fig.7.7) and the front
pump cover (Part.2, Fig.7.7) then take out the
vanes (Part.4-5-6, Fig.7.7) and the rotor (Part.3,
Fig.7.7)
.
Check the condition of the vanes and if necessary
replace.

Fig.7.7

Reassemble carefully in the reverse order.
To assemble proceed on the following way:
-

first insert the vane (Part.6, Fig.7.7) marked
with two notches,

-

insert the vane (Part.5, Fig.7.7),

-

insert the vane (Part.4, Fig.7.7).

The electrical system is designed and built to provide
the greatest possible protection for the components
of the fruit feeder.
When a motor stops due to overloading, the general
alarm lamp HL2 lights up to indicate that the overload
cutout has tripped.

Appliance

Oil type

Density

Viscosity

Flash

Freezing

(at 15°C)

(at 50°C)

point

point

(Kg/m3)

(°E)

(°C)

(°C)

Gear motor

Mobil Gear 629

890

11,3

+228

-24

Chain

Suniso 3G

914

2,7

+176

-40

7.4 Maintenance of electrical system

7.5 Lubrificant oil chart for Fruit Feeder 2000

If the overload cutout trips again shortly after
restarting, this means that the fault/short circuit still
exists.
Check the electrical circuit and ascertain whether
any mechanical components have seized.

RETURN TO PM

Содержание HOYER FRUIT FEEDER 2000














































Отзывы: