FF711BD
4-3
Tetra Pak
Hoyer
Fig. 4.2
The FRUIT FEEDER 2000 must be situated as
close as possible to the filler machine for the
following reasons:
a. The pressure of ice cream reaches its lowest
value at this point.
b. The ingredients fed in tend to be deposited
on the layer of ice-cream in contact with the
pipe. Therefore a smaller distance between
the mixer and the filler machine will give rise
to a more uniform distribution of the
ingredients in the ice-cream.
Fig. 4.3
For the installation procedure, ensure that the
following instructions are followed:
a. Position the machine at the place of
production and check the nameplate data to
ensure that the machine is compatible with
the electrical power supply (Pos.A, Fig.4.4).
b. Connect the ice-cream inlet and outlet pipes
to the pump body (Pos.B, Fig.4.4).
c. Connect the electrical cable (3 earth)
by means of a wall-mounted switch fitted with
a fuse.
Fig. 4.4
ATTENTION:
L’interruttore differenziale di protezione deve
essere di classe “A” adatta alla protezione dei
circuiti elettronici di potenza dell’inverter.
1
1
1
MODEL
SERIAL
N.:
YEAR OF CONSTRUCTION:
ELECTRICAL
SUPPLY:
PNEUMATIC SUPPLY:
REFRIGERANT:
HEATING GAS:
THERMAL
CAPACITY:
kW
Kg.
Kcal/h
Via Monferrato, 52 - 20098 San Giuliano Milanese
( MI ) Italia - Tel. 02-982921 - Fax 02-9880171
Made in Italy
Tetra Pak
Hoyer
V
bar
Nlt./min.
ph
Hz
Type
B
A
B
RETURN TO PM