FF711BB
2-3
Tetra Pak
Hoyer
•
The personnel operating this machine must
be aware of and observe strictly the general
safety precautions. Failure to observe the
precautions may result in injury to personnel
or damage to machine components.
•
Maintenance must be carried out with the
machine turned off. The main switch must be
in the “OFF” position, the air valve must be
closed and a “work in progress” notice must
be fixed to the machine.
•
The user must ensure that all the instructions
contained in the manual are followed strictly.
•
High (Low) temperatures are reached inside
the machine. After turning off the electric
power supply, wait for the machine to cool
(heat) to room temperature before carrying
out work on it.
•
Any tampering with the safety system for any
reason is at the user’s own risk and shall be
his responsibility.
•
Never attempt to turn off the safety switches
or make them inoperative.
•
The safety of machines used in conjunction
with the machine described in this manual, if
not supplied directly by Tetra Pak Hoyer
S.p.A., is the customer’s responsibility.
•
The pressure, speed, temperature and voltage
limits as well as all other indications given
are indispensable for the correct running of
the machine and must always be observed by
the customer.
•
For the pneumatic components, dehumidified
compressed air must be used at the right
pressure and in the prescribed quantities,
without any trace of oil.
•
The environmental conditions of the
installation site must also be taken into
consideration.
•
The national laws which govern the use of
these kinds of machine must also be respected.
The machine is authorized to run within the
following environmental restrictions:
• Temperature :
from 4°C to 40°C
• Humidity
:
from 20% to 95%.
F
NOTE:
Our company declines all responsibility for
damage caused by failure to heed the above
warnings.
2.4 Warning and special notices
2.5 Environmental working restrictions
RETURN TO PM
