26
Parameter
Explanation and setting options
coL�V
colour of the characters in the display for the totaliser value
bk/wh permanently black/white
yellow permanently yellow
green permanently green
red permanently red
r-cF display colour between limits cFL���cFH red, outside green�
G-cF display colour between limits cFL���cFH green, outside red�
7.6.6 Submenu SIM
Parameter
Explanation and setting options
S�FLW
simulated flow coefficient
S�TMP
simulated temperature value
S�PRS
simulated pressure value
cr�UL measured value below the detection zone
→
error message
UL measured value below the display range
→
warning
OL measured value above the display range
→
warning
cr�OL measured value above the detection zone
→
error message
S�Tim
simulation time in minutes
S�On
simulation status: OFF, On
8 Set-up
After power on and expiry of the power-on delay time of approx� 1 s, the unit is in
the Run mode (= normal operating mode)� It carries out its measurement and eval-
uation functions and generates output signals according to the set parameters�
During the power-on delay time the output signal is at 20 mA�
