28
9.1.2 Change to the process value display (RUN mode)
There are 2 possibilities:
1�
Wait for 30 seconds (→ 9.1.4 Timeout).
2�
Press [▲] or [▼] to go to the end of the menu and change to the next higher
menu�
9.1.3 Lock / unlock
The unit can be locked electronically to prevent unintentional settings� On delivery:
not locked�
Locking:
►
Make sure that the unit is in the normal operating mode�
► Press [▲] and [▼] simultaneously for 10 s until [
🔒
Set Menu lock] is displayed�
During operation: [
🔒
Lock via key] is displayed if you try to change param-
eter values�
Unlocking:
►
Make sure that the unit is in the normal operating mode�
► Press [▲] and [▼] simultaneously for 10 s until [Reset menu lock] is displayed.
9.1.4 Timeout
If no button is pressed for 30 s during parameter setting, the unit returns to the
operating mode with unchanged values�
9.2 Settings for volumetric flow monitoring
9.2.1 Analogue signal volumetric flow OUT1 or OUT2
►
Select [SELx] and set FLOW�
►
Select [ASPx] and set the value at which 4 mA is provided�
►
Select [AEPx] and set the value at which 20 mA is provided�
Menu OUTx:
[SELx]
[ASPx]
[AEPx]
9.3 Settings for consumed quantity monitoring
9.3.1 Manual counter reset
►
Select [rTo] and set rES�T�
> The totaliser is reset to zero�
Menu EF:
[rTo]
