TerraTec Maestro 3296, Руководство пользователя

Страница: 59 / 80

59
SoundSSoundSSoundSSoundSSoundS
yyyyy
sssss
tem Maestem Maestem Maestem Maestem Maes
tro32/96tro32/96tro32/96tro32/96tro32/96
Possible Problems during Installation
If you have followed the installation instructions correctly and if the soundcard nevertheless
refuses to operate properly, there is probably a hardware conflict with other system components.
Accordingly, we have set out an overview of the standard and possible settings of MAESTRO
32/96 at this point:
1. The default setting for the basic DMA channels in the Windows Sound System Mode (WSS)
is 1/0. This means that channel 1 is used for playing back digital audio data, and channel 0
is used for recording these data. Simultaneous recording and playback (enhanced full duplex)
is made possible in this way. In the event of a conflict, you can also select the settings 0/1
and 0/3 and, if you decide not to use the enhanced full duplex function, you can also select
the channel 0,1 or 3. In the SB Pro mode, the standard channel is 1, and only 0 and 3 are the
alternatives which can be used.
2. The standard interrupt setting is IRQ 5 for the SB Pro and the WSS mode. 7, 9, 11, 12 and 15
are alternatives.
3. The standard setting for the MPU-401 MIDI interface is the interrupt 2/9. The alternative
IRQs in this respect are 5, 7, 11, 12 and 15. For the 2nd mpu-401 interrupt 12 is used by
default. Also this can be changed to one of the other available alternatives. The default
address is set to 330H for the 1st and 320H for the 2nd MIDI-interface.
4. The standard I/O address in the soundblaster mode is 220H and can be switched to 240H.
The standard setting in the WSS mode is 530H, and the alternatives are E80H, F40H and
604H.
5. Further addresses which cannot be adjusted are set to 388H (FM chip for AdLib compatibility)
and 201H (joystick ports).
DMA Conflict
DMA channel 1 is the standard channel used for playing back digitised sound. If you have any
problems with this playback procedure (e.g. voice or effect playback during games), please
check if any other components are using this channel. If possible, change the setting of the
other card in the event of a conflict, as virtually all games which support sound output use the
DMA channel 1 as their default setting.