TERMOSTROJ TERMO-Blok Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 116

TERMOSTROJ TERMO-Blok Скачать руководство пользователя страница 4

TMS-UT-0114-T03-1

1. Introduction

Thank you for your confidence you have shown to us by purchasing our central heating boiler.
In order to use the boiler to the utmost correctly and safely, and above all economically, read
thoroughly these instructions before continuing with installation.

The appliances must be installed by a competent person, who is responsible for adhering to
the existing regulations, rules and guidelines.

1.1. Applicable documents

The following additional documents are provided with the appliance:

For the owner of the system:

Instructions for use
Warranty card

For the qualified technician:

Instructions for installation
Electrical drawing for the appliance

1.2. Retention of documents

Please pass on this installation manual to the owner of the system. The owner should retain the
manuals so that they are available when required.

1.3. Introduction

TERMO-Extra and TERMO-Blok are economical central heating boilers that may be used as an
independent or additional source of heat.
TERMO-Extra and TERMO-Blok boilers offer you the possibility, to reduce the power of a heater if
necessary. The power may be switched on when necessary automatically with the built-in step
regulator or manually with switches on the control board. In this way it is possible to adapt the boiler to
the utmost to circumstances on the spot.
The boiler operates on the principle of rapid heating smaller water quantities, so that exploiting of
energy is already 100%.

They are particularly suitable for heating smaller business premise, where you are short of space
(small apartments, efficiency apartments, representation offices, smaller coffee-shop spaces etc.) or
for heating larger spaces in early season when the main boiler is over dimensioned.
TERMO-Extra boilers are manufactured only with upper connections. Temperature operation area is
from 20

o

C to 90

o

C.

TERMO-Extra and TERMO-Blok are designed in such a way that in apartment-contained central
heating they can fit well with your furniture.

1.4. Heating curves

1.4.1. Availability of heating curves

Use of heating curves, temperature compensation, is limited to Termo Extra boilers with options

C

and

W

, Termo Blok boilers with option

C

and Termo PTV boilers.

INSTRUCTIONS FOR USE

We reserve the right of alternations

page 1

«
...
2
3
4
5
6
...
»

Содержание TERMO-Blok





















































































































Отзывы:

Нет отзывов