TERMOSTROJ TERMO-Blok, Инструкция по эксплуатации, Страница: 18 / 116

TRGOVINA TERMOSTROJ d.o.o.
10250 Lučko, F. Puškarića 1d
Tel/Fax +385 1 6531-008, 6531-015, 6531-016 Eurposka unija
e-mail: info@termostroj.com web: http://www.termostroj.com European Union
2.3.4. Central heating functions with heating curves disabled
>5 sec
4 1
4 1 >5 sec
>10 sec
>5 sec 3
32
>5 sec
<5 sec
Display of desired temperature in boiler
If the key (6) is held pressed less than 5 s the LED display will show the desired
temperature in the boiler. The value is displayed for 5 seconds, after which the
display normally shows the real
temperature of water in the boiler.
Setting of the desired temperature in the boiler
By pressing the key (6) user can enter the boiler temperature menu.
The desired boiler temperature is blinking.
By pressing the key (6) UP or DOWN, the desired boiler temperature can be set
in steps of 1°C.
If the key is held pressed less than 5 s the value from the display becomes the
desired boiler temperature.
Possible adjustment is from 20°C up to 90°C for radiator heating.
Possible adjustment is from 15°C up to 45°C for under floor heating.
Limiting maximum power of the boiler
By pressing the key (6) user can limit the power level.
By pressing the key it is possible to select 1 2 or 3 as number of the available
power levels. If the key (6) is held pressed less than 5 s the selected power level
mode will become active.
Boilers from 6 to 16 kW have only two power levels.
INSTALACIJSKE UPUTE
Zadržavamo pravo izmjene uputa bez posebne najave