Terex Genie S-80 SC, Руководство оператора, Страница: 57 / 78

Second Edition • Second Printing Operator's Manual
Operating Instructions
Part No. 1311085GT S
®
-80 XC
™
• S
®
-85 XC
™
55
LCD Screen
The LCD screen at the ground controls displays
hour meter, voltage, oil pressure and coolant
temperature. The screen also displays fault codes
and other service information.
Contact Alarm (if equipped)
The contact alarm is designed to alert ground
personnel when an operator makes contact with
the platform control panel, interrupting boom
movement, sounding an alarm and flashing
warning lights.
When the contact alarm cable is tripped, the lift
and drive functions are disabled at the platform.
The audio and visual warnings will activate alerting
others that assistance may be needed. These
notifications will continue until the system is reset.
1 The contact alarm cable is tripped, releasing
the actuator from the switch socket.
2 Insert the actuator into the switch socket to
turn off flashing lights and audio alarm.
a actuator
b contact alarm cable
c flashing alarm
d switch socket
Standstill Regeneration
During the DPF standstill generation process,
all boom functions are disabled.
Keep clear of the engine exhaust and muffler.
Don't leave the machine unattended.
The DPF standstill regeneration cannot be
activated if not requested by the engine, or in
the presence of some engine faults.
If the standstill regeneration request is
ignored, the soot in the DPF can reach
extreme levels. The filter will be permanently
damaged and will have to be replaced by a
qualified service technician.
Under emergencies, the DPF standstill
regeneration can be interrupted in three ways:

The engine is turned off by the key switch.

The ESC button is pressed.

The ESTOP stop button is pushed.
If this occurs, the standstill regeneration may
need to be restarted.
The DPF standstill regeneration cannot begin
until the engine has been run for at least two
minutes and the coolant temperature has
reached 35°C.