Terex Genie S-80 SC, Руководство оператора

Страница: 43 / 78

Second Edition • Second Printing Operator's Manual
Inspections
Part No. 1311085GT S
®
-80 XC
™
• S
®
-85 XC
™
41
Do Not Operate Unless:
 You learn and practice the principles of safe
machine operation contained in this operator’s
manual.
1 Avoid hazardous situations.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
Know and understand the workplace
inspection before going on to the next
section.
5 Only use the machine as it was intended.
Workplace Inspection
Fundamentals
The workplace inspection helps the operator
determine if the workplace is suitable for safe
machine operation. It should be performed by the
operator prior to moving the machine to the
workplace.
It is the operator’s responsibility to read and
remember the workplace hazards, then watch for
and avoid them while moving, setting up, and
operating the machine.
Workplace Inspection Checklist
Be aware of and avoid the following hazardous
situations:

drop-offs or holes

bumps, floor obstructions, or debris

sloped surfaces

unstable or slippery surfaces

overhead obstructions and high voltage
conductors

hazardous locations

inadequate surface support to withstand all
load forces imposed by the machine

wind and weather conditions

the presence of unauthorized personnel

other possible unsafe conditions