Tennant T600e Скачать руководство пользователя страница 227

Страница: 227 / 231

227

T600/T600e 9016605 (04-2018)

SERVICE

REMOVING / INSTALLING THE DETERGENT PUMP
ASSEMBLY

FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove
key, and set parking brake if equipped.

1. Completely empty the solution tank.

2. Turn the key to the OFF position.

3. Disconnect the battery cable from the machine.

FOR SAFETY: When servicing machine, Disconnect
battery connection and charger cord before
working on machine.

4. Remove the front scrub head cover from the

machine.

5. Completely empty all solution from the Severe

Environment tank.

6. Disconnect the main wire harness from the

detergent metering assembly.

7. Disconnect the solution hoses from the detergent

pump assembly IN and OUT ports.

8. Remove the hardware securing the detergent

pump assembly to the support bracket.

9. Carefully pull the detergent pump assembly out

from the support bracket.

10. Disassemble the detergent pump assembly as

necessary to service and / or replace parts.

11. Reassemble the detergent pump assembly in

reverse order of disassembly.

12. Reinstall the detergent pump assembly onto the

machine in reverse order of disassembly.

Содержание T600e








































































































































































































































Результаты поиска

Содержание T600e

Отзывы:

Tennant T600e, Руководство по эксплуатации, Страница: 227 / 231

Результаты поиска

Содержание T600e

Отзывы: