manualshive.com logo in svg

Tennant T600e, Руководство по эксплуатации

Поделиться
Скачать
Tennant T600e Скачать руководство пользователя страница 165

165

T600/T600e 9016605 (04-2018)

SERVICE

FOR SAFETY: Before leaving or servicing machine, 
stop on level surface, turn off machine, remove 
key, and set parking brake if equipped.

1.  Turn the key to the OFF position.

2.  Disconnect the battery cable from the machine.

FOR SAFETY: When servicing machine, Disconnect 
battery connection and charger cord before 
working on machine.

3.  Remove the front scrub head cover from the 

machine.

4.  Remove the scrub head from the machine. Refer 

to REMOVING / REPLACING / INSTALLING THE 
DISK SCRUB HEAD ASSEMBLY.

5.  Remove components necessary to complete 

maintenance from the scrub head.

6.  Replace parts as needed.

7.  Reassemble the scrub head in reverse order of 

disassembly.

8.  Reinstall the scrub head onto the machine. See 

REMOVING / REPLACING / INSTALLING THE 
DISK SCRUB HEAD ASSEMBLY.

9.  Reinstall the front scrub head cover onto the 

machine.

Содержание T600e








































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды