manualshive.com logo in svg

Tennant T600e, Руководство по эксплуатации

Поделиться
Скачать
Tennant T600e Скачать руководство пользователя страница 203

203

T600/T600e 9016605 (04-2018)

SERVICE

FOR SAFETY: Before leaving or servicing machine, 
stop on level surface, turn off machine, remove 
key, and set parking brake if equipped.

1.  Turn the key to the OFF position.

2.  Disconnect the battery cable from the machine.

FOR SAFETY: When servicing machine, disconnect 
battery connection and charger cord before 
working on machine.

3.  Remove the hardware securing the control column 

cover to the machine, remove the on-board battery 
charger cable from the cord hooks (if machine 
is equipped with on-board battery charger), and 
carefully lower the control column cover.

4.  Remove the hardware securing the instrument 

panel to the console.

5.  Carefully separate the touch panel from the 

console.

6.  If replacing / removing the speed range 

potentiometer, see REMOVING / INSTALLING THE 
SPEED RANGE POTENTIOMETER.

7.  If replacing / removing the direction switch, see 

REMOVING / INSTALLING THE DIRECTION 
SWITCH.

8.  Remove the cover from the console.

Содержание T600e








































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды