Tennant T600e, Руководство по эксплуатации

Страница: 178 / 231

178 T600/T600e 9016605 (04-2018)
SERVICE
11. Proceed to REMOVING / INSTALLING THE
LOWER ORBITAL HEAD ISOLATORS if replacing
the lower isolators.
12. Reinstall the removed scrub head / new scrub head
onto the machine in reverse order of disassembly.
REMOVING / INSTALLING THE ORBITAL SCRUB
HEAD MOTOR CARBON BRUSHES
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove
key, and set parking brake if equipped.
1. Turn the key to the OFF position.
2. Disconnect the battery cable from the machine.
FOR SAFETY: When servicing machine, Disconnect
battery connection and charger cord before
working on machine.
3. Remove the front scrub head cover from the
machine.
4. Remove the hardware securing the cap to the
motor and remove the cap from the motor.
5. Remove the screw securing the carbon brush to
the motor.
6. Remove the spring pressing the carbon brush into
the motor from over the carbon brush and pull the
carbon brush from the motor.