manualshive.com logo in svg

Tennant T600e, Руководство по эксплуатации

Поделиться
Скачать
Tennant T600e Скачать руководство пользователя страница 132

132

T600/T600e 9016605 (04-2018)

SERVICE

   RECONFIGURING THE MACHINE AFTER NEW 
HARDWARE / OPTION INSTALLATION

SYSTEM REQUIREMENTS: Windows® 7 Operating 
System, Microsoft .NET 4.5 or later, USB to Mini-USB 
cable.

Machine software confi guration, which is stored in the 
interface module, must be programmed if the i-Drive or 
interface modules are replaced or if optional features 
are installed in the fi eld.

Authorized service providers can download the 
Service Diagnostics software

 Factory-Direct Tennant 

Service personnel have this software installed on their 
ServiceLink devices.

A USB cable connects from the notebook to an 
external port on the control console (USB to mini USB 
adapter cable required). The SERVICE DIAGNOSTICS 
TOOL confi gures up to seven control modules 
depending on options. The interface module stores 
confi guration data and communicates via RS232 serial 
communication with the i-Drive and through a CAN-
Bus to all other modules.

1.  Connect a USB cable from the computer to the 

machine.

2.  Turn the key switch to the ON position.

 

3.  Double click the Service Diagnostics desktop 

shortcut or fi nd the software in All Programs to 
launch the software.

4.  Click on the Confi guration button to display a list of 

confi gurable options.

Содержание T600e








































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды