MAINTENANCE
Tennant T300e/T300 (03- 2015)
41
SQUEEGEE BLADE REPLACEMENT
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove key
and set parking brake if equipped.
Each squeegee blade has four wiping edges. When the
blades become worn, simply rotate the blades
end-for-end or top-to-bottom for a new wiping edge.
Replace blade if all four edges are worn.
1. Remove the squeegee assembly from the machine.
2. Fully loosen the two outside knobs on squeegee
assembly. This will separate the spring loaded
blade retainer from squeegee frame (Figure 127).
To loosen the knobs quickly, squeeze the blade
retainer and squeegee frame together.
FIG. 127
3. Remove worn blade(s) from the blade retainer
(Figure 128).
FIG. 128
4. Rotate the rear blade to a new wiping edge (Figure
129). Make sure to align the slots in the blade with
retainer tabs.
FIG. 129
5. Squeeze the squeegee frame and blade retainer
together and re-tighten the two outside knobs
(Figure 130).
FIG. 130
Содержание IRIS T300
Страница 49: ...SPECIFICATIONS Tennant T300e T300 03 2015 49 1095 mm 772 mm DUAL DISK MODEL 1314 mm 660 mm...
Страница 50: ...SPECIFICATIONS 50 Tennant T300e T300 03 2015 1095 mm 772 mm CYLINDRICAL BRUSH MODEL 1283 mm 635 mm...
Страница 51: ...SPECIFICATIONS Tennant T300e T300 03 2015 51 1095 mm 772 mm ORBITAL PAD MODEL 1245 mm 521 mm...
Страница 52: ...SPECIFICATIONS 52 Tennant T300e T300 03 2015...
