SUPERVISOR CONTROLS
Tennant T300e/T300 (NIL)
55
2.
Press the “Add Profile” button to add a new
user profile (Figure 145).
FIG. 145
3.
Press the “Operator” button to add a new
operator (Figure 146).
Or press the “Supervisor” button to add an
additional supervisor (Figure 146).
Note: The machine’s default supervisor profile can
not be deleted from profile list.
FIG. 146
4. Enter the new user’s profile ID (identification) then
press the green forward arrow (Figure 147).
FIG. 147
5. Create an assigned login number for the new user
profile then press the green arrow (Figure 148).
The new login number can be any combination of
numbers ranging from 3 to 8 digits long.
FIG. 148
6. Now select the controls that the new user should
have access to use (Figure 149). Green represents
unlocked controls and gray represents locked
controls. Press the blinking save icon to save new
profile.
FIG. 149
7. The new user profile is now saved to the operator
profile list as shown (Figure 150). Multiple Operator
and Supervisor user profiles can be added. Press
the back arrow to return to the previous screen to
add more user profiles or to enable login.
FIG. 150
8. To enable the login number at start up, press the
“Enable Login” button (Figure 151). This button will
change from “Enable Login” to “Disable Login”.
This will allow you to disable a required login
number at start up as described in step 13.
FIG. 151
Содержание IRIS T300
Страница 49: ...SPECIFICATIONS Tennant T300e T300 03 2015 49 1095 mm 772 mm DUAL DISK MODEL 1314 mm 660 mm...
Страница 50: ...SPECIFICATIONS 50 Tennant T300e T300 03 2015 1095 mm 772 mm CYLINDRICAL BRUSH MODEL 1283 mm 635 mm...
Страница 51: ...SPECIFICATIONS Tennant T300e T300 03 2015 51 1095 mm 772 mm ORBITAL PAD MODEL 1245 mm 521 mm...
Страница 52: ...SPECIFICATIONS 52 Tennant T300e T300 03 2015...
