Tennant IRIS T300 Скачать руководство пользователя страница 5

Страница: 5 / 57

OPERATION

Tennant T300e/T300 (03- 2015)

4. Before leaving or servicing machine:

Stop on level surface.

Set the parking brake, if equipped.

Turn off machine and remove key.

5. When servicing machine:

Disconnect battery connection and charger

cord before working on machine.

All work must be done with sufficient

lighting and visibility.

All repairs must be performed by trained

personnel.

Use Tennant supplied or approved

replacement parts.

Do not modify the machine from its original

design.

Do not jack up machine.

Avoid moving parts. Do not wear loose

clothing or jewelry and secure long hair.

Do not disconnect the off- board charger’s

DC cord from the machine’s receptacle

when the charger is operating. Arcing may

result. If the charger must be interrupted

during charging cycle, disconnect the AC

power supply cord first.

Do not use incompatible battery chargers

as this may damage battery packs and

potentially cause a fire hazard.

Inspect charger cord regularly for damage.

Keep work area well ventilated.

Avoid contact with battery acid.

Keep all metal objects off batteries.

Do not power spray or hose off machine.

Use a hoist or adequate assistance when

lifting batteries.

Battery installation must be done by trained

personnel.

Wear personal protection equipment as

needed and where recommended in this

manual.

For Safety: wear protective gloves.

For Safety: wear eye protection.

6. When loading/unloading machine onto/off

truck or trailer:

Drain tanks before loading machine.

Use a ramp, truck or trailer that can support

the machine weight and operator.

Do not operate the machine on a ramp

incline that exceeds a 21% grade level.

Use a winch if ramp incline exceeds a 21%

grade level.

Lower the scrub head and squeegee before

tying down machine.

Turn machine off and remove key.

Set parking brake (if equipped).

Block machine wheels.

Use tie- down straps to secure machine.

Содержание IRIS T300


























































Результаты поиска

Содержание IRIS T300

Отзывы:

Похожие инструкции для IRIS T300

Бренды по названию

Популярные бренды

Tennant IRIS T300, Руководство оператора

Результаты поиска

Содержание IRIS T300

Отзывы:

Похожие инструкции для IRIS T300

Бренды по названию

Популярные бренды