Tennant 5400, Руководство по обслуживанию

Страница: 33 / 163

SCRUBBING
3-9
5400 330735 (3–01)
5. With the spring clip pressed down flat to the
top of the scrub head, pull the bottom of the
idler plate out of the end of the brush and off
the spring clip.
6. The scrub brush can now be removed from
the machine.
7. Position the new scrub brush under the
scrub head.
NOTE: One end of the cylindrical scrub brush has
a double row of bristles. This end must be on the
idler side of the scrub head.
8. Place the brush on the motor–drive end first.
9. Partially engage the idler plug into the other
end of the scrub brush.
10. Position the idler plate on the scrub head,
making sure that the notches on the idler
plate engage the lip of the scrub head.
11. Push the spring clip down until the slot is
positioned under the clip on the idler plate.
Release the spring.
12. Start the brushes and check for proper
brush pattern. See TO CHECK
CYLINDRICAL BRUSH PATTERN
instructions.
Note: Every 50 hours the front brush should be
installed in the rear and the rear brush installed in
the front to keep an even wear pattern on the
bristles.