Cyclone User Manual
75
Projector Mounting
–
Portrait/4 rigging points
This mounting style is for projectors with no rigging points
on top of the chassis (most projectors).
In all cases, first remove the projector feet, and use (usually
M10) bolts to fix to the two Portrait mount L-Brackets.
IMPORTANT:
Projectors with air inlets on the side of the projector
chassis: The inlet side MUST face down, for optimal airflow.
Side air inlets?
Make sure they face DOWN
It’s
easier to do this with the projector lying
on its back on a soft surface:
1.
Remove projector feet
2.
Mount Projector Bars to projector base
3.
Mount projector bars to L-Brackets
a.
Consider desired tilt angle: UP,
DOWN or HORIZONTAL
b.
Each mounting hole step is
approximately 1.5 degrees
(depending on projector size)
c.
Check that the L-bracket bases are
level
4.
Mount the assembly onto the projector
tray and fix in place with the M8
carriage bolts supplied
The mounting kit provides considerable
flexibility
–
some trial and error may be
needed to find the optimum mounting angle.
M10 Carriage Bolt
Projector Bar
Projector bolt (usually M10)
Projector Bar Shim
M8 Nut
M8 Washer
M8 Carriage Bolt
L-Bracket
M10 Washer
M10 Locknut
Tilt - 5
°
up
Tilt - 5
°
down
Horizontal
