Cyclone User Manual
36
One or Two Power Circuits?
Tempest enclosures may be wired on single or double
circuit supplies. On a single feed, both enclosure and
projector are permanently on. With a split (double) feed
supply, you can switch off the projector when not in use,
while the enclosure continues to protect it 24/7.
Tip: most people use single feed.
Single Feed
•
Enclosure and projector are permanently on.
•
Enclosure and Projector must be rated for the
same voltage.
•
Supply must be rated for projector current plus
200 watts.
•
Supply must be permanently ON.
Split feed
•
Enclosure power (FEED) must be permanently ON.
•
Projector power (SPLIT) may be switched off.
•
Enclosure power must be rated for 1,000 watts.
•
Projector power must be rated for the projector (see
projector manual).
Projector and enclosure power must be same voltage.
For single feed wiring, no modification to the DEC4
Controller motherboard is needed.
IMPORTANT:
For split feed wiring, use a side cutter to cut both AC links at both
ends:
1
1
2
Single Feed
Split Feed
