Cyclone User Manual
57
User Interface LCD Display
The display on the Control display provides additional status
information, depending on the operating mode:
RDM Only Monitor Mode
RDM+DMX Control Mode
RDM+DMX Service Mode
Control Interface Operation
The Control Interface is normally LOCKED.
•
To UNLOCK, hold ESC and OK together for 5 seconds.
•
You are now in the CONTROL MENU
•
Use
to scroll up and down the menu.
•
Press OK to enter a menu item
•
Use
to set the item parameter, or to scroll to the
next menu level.
•
Use ESC to go BACK, or OK to confirm settings (
).
•
To exit and LOCK, hold ESC for 5 seconds.
Menu will time out and the display will lock after ten
minutes.
(Alternating DMX Display requires a DMX
signal to be present)
