Cyclone User Manual
16
Steep Angles:
FIRST, MAKE SURE THE CYCLOVATOR IS SECURELY FIXED
TO THE GROUND.
For steep projection angles, loosen the four channel nut
bolts and carefully slide the enclosure in the direction
that will be ‘
UP
’.
The center of gravity will still be roughly centered in show
position, but you will have to work a bit harder to crank
the enclosure up to its show trim!
It is important to use the Inlet Cowl accessory for angles
above 30
°
.
Setting the Show Position Stop
Cyclovator gives you a locator for your show position, for
accurate show positioning.
With the Cyclovator in Show position:
1.
Loosen the Locking Collar set screw (a)
2.
Slide the Locking Collar firmly against the Acme
Nut Plate (b)
3.
Tighten the Locking Collar set screw (a)
4.
You now have two reference locations:
•
Horizontal
•
Show
ALWAYS MAKE SURE THAT BOTH LOCKING KNOBS (c) ARE
LOOSE WHEN RAISING/LOWERING THE CYCLOVATOR,
AND TIGHT WHEN IN SHOW OR SERVICE POSITION.
(a)
(b)
(c)
