Cyclone User Manual
12
Mounting Options
–
Stacking Kit
Cyclone G4 may be stacked up to three units high, using
the 51.SK stacking Kit. You will need the total number of
Cyclones to be stacked, minus one stacking kit(s).
So, for a stack of three enclosures, order 3-1=2 stacking
kits.
Note: Cyclone enclosures must be of the same model to
stack in this way.
51.SK
Stacking Kit (set of four, for one enclosure)
Mounting Options
–
Swivel Stacking Kit
Cyclone G4 may be stacked two units high, with beams up
to 40
°
apart, using the Swivel Stacking Kit. Enclosures
must be the same model.
This is very useful for edge-blending across a wide area
with a limited number of rigging positions.
51.SS.xxx (where xxx is the Cyclone model number) Swivel
stacking kit for two G4 Cyclone enclosures
Bolt top leg to M12
socket each corner
Bolt bottom leg to M12
socket each corner
Join top and bottom
sections together with
Clevis pins
Mount Swivel Brackets to
M12 threaded inserts in
enclosure frames with
the M12 bolts provided.
All four brackets are
identical
Join the radiused slots
using the Hex bolts and
nuts provided.
Adjust desired angle
and tighten nuts
