TeMec Drive AZ2, Руководство пользователя

Страница: 46 / 52

AZ
2
USER MANUAL
ST.TEC.003.EN Rev. 2.1
46 / 52
The parameters associated to the over voltage error are:
Label Function Range
Default
value
AO00 If enabled, the drive blocks in case of error ON / OFF ON
AO01
Value of the maximum supply voltage – high threshold 12 – 60 [V] 55
AO02 Value of the maximum supply voltage – low threshold 12 – 60 [V] 52
AO03 Delay of the error detection 1 – 2000 [ms] 500
Table 42: overvoltage error parameters
The parameters associated to the over temperature error are:
Label Function Range
Default
value
AT00 If enabled, the drive blocks in case of error ON / OFF ON
AT01 Value of the maximum temperature – high threshold 0 – 90 [°C] 80
AT02 Value of the maximum temperature – low threshold 0 – 90 [°C] 79
AT03 Delay of the error detection 1 – 30000 [ms] 30000
Table 43: overtemperature error parameters
The parameters associated to the loss of synchronism error are:
Label Function Range
Default
value
AS00 If enabled, the drive blocks in case of error ON / OFF ON
AS01
Value of the maximum number of pulses difference –
high threshold
1 – 1000 10
AS02
Value of the maximum number of pulses difference –
low threshold
0 – 1000 9
AS03 Delay of the error detection 1 – 2000 [ms] 500
Table 44: loss of synchronism error parameters
For the mechanisms for the storage of counters and statistics, the configuration parameters are:
Label Function Range
Default
value
GES6
If enabled, the drive checks that the encoder counters
are not corrupted once they are loaded from memory
ON / OFF ON
GES8
Under this percentage of voltage supply, counters and
statistics are saved in memory
0 – 100 [%] 90
SST1
If at least one of the motors has a speed greater than
that indicated by this parameter, the counters and the
statistics are not saved in memory
0 – 65535
[pulses/s]
1
Table 45: parameters that define the mechanisms for the storage of counters and statistics