TeMec Drive AZ2, Руководство пользователя

Страница: 34 / 52

AZ
2
USER MANUAL
ST.TEC.003.EN Rev. 2.1
34 / 52
For example, the advanced parameter for motor 1 are (see 8.4 for the complete list):
Label Output Function Range
Default
value
SG05 Both Increment of deceleration start pulses 0 – 8 1
S100 Motor 1 Close limit pulses number
-2147483647 –
2147483647
0
S102 Motor 1 Open limit pulses number
-2147483647 –
2147483647
1000
S116 Motor 1 Open approaching voltage 1 – 48 [V] 5
S117 Motor 1 Close approaching voltage -1 – -48 [V] -5
S118 Motor 1 Pulses for braking advance 1 – 32000 1
S119 Motor 1 Tolerance used for the limit detection 0 – 500 2
S120 Motor 1 Duration of the braking after limit is reached 100 – 1000 [ms] 500
Table 22: example of synchronism advanced parameters
Another parameter accessible by the user regards the speed calculation but is recommended not to
change it:
Label Function Range Default
value
SG04 Speed N bit sampling 0 – 32 7
Table 23: speed calculation advanced parameter