5 |
P a g e
SAFETY INFORMATION
In this document you will be instructed how to use camera safely to avoid any damage to
person or property.
You have to be familiar with the safety requirements before starting to use the device! Camera
is used for transmission of video and single images via GSM network using GPRS and EDGE
technologies. To avoid burning and voltage caused injuries, of the personnel working with device,
please follow these safety requirements.
Installation and technical support of the equipment can be
performed only by a qualified personnel or a person who has
enough knowledge about this device and safety requirements.
Equipment requires 12V 750 mA power supply source that
complies with all safety requirements listed in LST EN 60950-1
standard.
The PC and AC/DC power adapter, to which the equipment is
connected, shall comply with the requirements of the standard
LST EN 60950-1. The equipment can be used with first (Personal
Computer) or second (Notebook) computer safety class which
must be properly grounded.
The light or attachable sensors shall comply with all safety
requirements listed in LST EN 60950-1 standard.
Internal camera battery may be changed only by qualified
personnel or a person who has enough knowledge about this
device and safety requirements.
Replacement battery type must be NiMH 9V, 250mAh.
Disconnect equipment from power supply before mounting to
avoid voltage effect!
Do not mount or serve device during a thunderbolt.
To avoid mechanical damage of the device it is recommended to transport the device packed in
damage-proof pack. While using the device, it should be placed so, that its indication LED would be
visible as they inform in which working mode the device is and if it has any working problems.
