14 |
P a g e
1.6
Setting camera’s GSM connection
To set up the GSM connection SIM card is required. SIM card is not supplied with the camera.
It may be purchased from GSM service provider. To set up the connection the following information
from your GSM provider is required:
1.
Phone number
. Most often used for all GSM service providers is *99#.
2.
PPP authentication.
The authentication protocol, which is used by your Internet Service
Provider [None, CHAP or PAP].
3.
APN.
Access Point Name (APN).
4.
User Name.
If GSM operator does not require username, leave it blank.
5.
Password.
If GSM operator does not require password, leave it blank.
6.
DNS server 1.
If GSM operator does not require DNS server 1, leave it blank.
7.
DNS server 2
. If GSM operator does not require DNS server 2, leave it blank.
Note: from DNS servers section drop down menu choose option Custom, in order to set DNS
servers.
!!!Do not forget to remove SIM card PIN code request. Otherwise you will not be able to
connect to GSM network.
After all the connection data from your GSM provider is collected, connect to the camera WEB
interface. Then select Network tab (refer to Fig. 5).
Figure 5.
Mobile network configuration.
Set up
Network settings
with data from internet service provider. The WEB server (camera)
port is advised to leave 80. After setting all GSM connection information press
Save
button. Camera
will reboot and startup with new settings.
