8 |
P a g e
Insert the SIM card into the holder with the metal contacts facing the SIM connector side.
Ensure that the „cut-off‟ corner is at the bottom right as in figure above. After the SIM card is inserted
attach the panel to its previous position.
1.3.2
Attaching antenna
Screw the antenna in a clockwise direction.
Position the antenna upwards at its connecting joint. This will ensure optimal reception.
1.3.3
Back panel overview
Figure 1
. EDGE camera back panel view.
1.
Power supply adapter socket.
2.
Battery ON/OFF switch
3.
5-pin terminal block
4.
2-pin terminal block
5.
MicroSD card socket
6.
Power LED
7.
GPRS/EDGE connection status LED
8.
Ready LED
9.
USB socket
10.
GSM antenna connector
Turn on battery switch to enable backup battery. The switched on battery will work as a backup
power source even when the mains power fails. If camera is not used set the battery switch to OFF
position.
Table 1
. EDGE camera back panel view.
LED
Colour
Solid
Off
Power
Green
Power ON
Power OFF
GPRS/EDGE conn. status
Green
Connected
No connection
Ready
Green
Ready to work
Booting
